Preliminary Product Listing

Model:
P2T-10M6G-25-R-5V48V-SFF-HIP40W

 

PMI Model No. P2T-10M6G-25-R-5V48V-SFF-HIP40W is a Reflective, Single Pole, Two Throw Pin Diode Switch that operates over the 10 to 6000 MHz frequency range.  This model is capable of handling an input power level of 40 watts CW while providing switching speeds of <100ns.  This model incorporates a TTL compatible driver for easy system integration.

 

Quick Links: (click the links below for additional information)

Product Feature

 

Specifications:

Frequency 10 to 6000 MHz
Isolation

25 dB typ, 20 dB min.

Insertion Loss 2.5 dB typ, 2.8 dB max.
VSWR In/Out 2.0:1 typ.
Operating Input Power 40 Watts CW max
(Not to be switched any higher than 50kHz [PRI] or hot switched)
RF Switching Speed

100ns max

(50% TTL to 10%/90% RF)

Impedance 50 OHMS
DC Voltage +5 V @ 30 mA typ
-48 V @ 30 mA typ
Control Signal

TTL Logic

Connectors

SMA(F) - Removable

Control Connectors Solder Pins
Finish Painted Blue
(Bottom side to be unpainted - silver plated)

 

Environmental Ratings:

Temperature:  -54 ºC to +85 ºC Operating
 -55 ºC to +125 ºC Non-Operating
 Shock:  MIL-STD-202F, Method 213B Cond. B
 Vibration:  MIL-STD-202F, Method 204D Cond. B
 Altitude:  MIL-STD-202F, Method 105C Cond. B
 Temperature Cycle:  MIL-STD-202F, Method 107D