Model:
P2T-10M6G-45-R-5V-SFF-HIP20W-OPT10M500M

 

PMI Model No. P2T-10M6G-45-R-5V-SFF-HIP20W-OPT10M500M is a Reflective, Single Pole, Two Throw Pin Diode Switch that operates over the 10 to 500 MHz frequency range.  This model is capable of handling an input power level of 20 watts CW while providing switching speeds of <100 ns and requires a single +5 VDC supply.  This model incorporates a TTL compatible driver for easy system integration.

 

Quick Links: (click the links below for additional information)

Product Feature

Typical Characteristics

 

Unit DataPL18449

 

Specifications:

Frequency 10 to 500 MHz (Available up to 6 GHz)
Isolation

45 dB Typ
Measured

70 dB @ 0.01 GHz
46 dB @ 0.5 GHz
22.86 dB @ 6 GHz

Insertion Loss 1.0 dB Typ – Measured 0.6 dB
VSWR In/Out 2.0:1 Max – Measured 1.13:1
Operating Input Power 20 Watts CW Max – Tested up to 25 Watts CW
(Not to be switched any higher than 50 kHz)
RF Switching Speed

100 ns Max – Measured 61.6 ns "On", 51.6 ns "Off"

(50% TTL to 10%/90% RF)

Impedance 50 OHMS
DC Voltage +5 V @ 30 mA Typ - Measured 45 mA
Control Signal

TTL Logic

Connectors

SMA(F) - Removable

Control Connectors Solder Pins
Finish Painted Blue

 

Environmental Ratings:

Temperature: -54 ºC to +85 ºC Operating
 -55 ºC to +125 ºC Non-Operating
 Shock:  MIL-STD-202F, Method 213B Cond. B
 Vibration:  MIL-STD-202F, Method 204D Cond. B
 Altitude:  MIL-STD-202F, Method 105C Cond. B
 Temperature Cycle:  MIL-STD-202F, Method 107D