Model: P4T-10G40G-60-T-292FF   

PMI Model No. P4T-10G40G-60-T-292FF is a SP4T Solid-State, Absorptive Switch that operates from 10 to 40GHz.  This model offers over 60dB of isolation and less than 6dB insertion loss.  The rise time is less than 15nsec and the fall time is less than 5nsec typically.  This model is designed to operate with input power levels up to +23dBm CW.  The DC Supply is +5V, 75mA and -5V, 45mA typically.  The housing measures 1.25” x 1.25” x 0.50” and is supplied with 2.92mm Female connectors.

Quick Links: (click the links below for additional information)

Product Feature

Test Report
Unit Data

PL13358 PL14800 PL14815
PL13359 PL14801 PL14816
PL13360 PL14802 PL14817
PL13361 PL14803 PL14818
PL13362 PL14804 PL14819



Frequency 10.0 to 40.0 GHz
Insertion Loss 6 dB max - Measured 5.62 dB
Insertion Loss Flatness ±1.5 dB typical over full band - Measured 1.47 dB
Isolation 60 dB min - Measured 69.58 dB
VSWR In/Out 2.0:1 max - Measured 1.98:1 In, 1.96:1 Out
Power Handling >200 mW CW max (+23 dBm CW)
Switching Speed (10% to 90% RF)

10% to 90%; <100 ns - Measured 30 ns

DC Voltage and Current

+5 VDC @ 100 mA typ - Measured 75 mA

-5 VDC @ 100 mA typ - Measured 43 mA

Control Signal

2-BIt Decoded TTL Logic

RF Connectors 2.92 mm (F)
DC & Control Solder Pins
Size 1.25" x 1.25" x 0.5"
Finish Gold Plated


Environmental Ratings:

Temperature:  -55ºC to +85ºC Operating
 -65ºC to +125ºC Non-Operating
 Humidity:  MIL-STD-202G, Method 103B Cond. B
 Shock:  MIL-STD-202G, Method 213B Cond. B
 Vibration:  MIL-STD-202G, Method 204D Cond. B
 Altitude:  MIL-STD-202G, Method 105C Cond. B
 Temperature Cycle:  MIL-STD-202G, Method 107D Cond. A