Model: AMP-218-13-16-12-SFF  

PMI Model AMP-218-13-16-12-SFF is a 2.0 - 18.0 GHz amplifier with a nominal gain of 13 dB, +16 dBm compression point, and a noise figure of 4 dB maximum.


Quick Links: (click the links below for additional information)

Product Feature

Test Report

 

Specifications:

Frequency Range 2.0 to 18.0 GHz
Gain 13 dB ± 2 dB @ 25º C - Measured 13.5 dB
Small Gain Flatness ±1.0 dB Max. - Measured ±0.71 dB
Gain Stability ±1.0 dB Max. - Measured ±0.3 dB
(Over Temp, -10 ºC to 70 ºC)
Noise Figure

4 dB Max. @ 25 ºC - Measured 3.9 dB

5 dB Max. @ 70 ºC - Measured 4.6 dB

1dB Gain Compression 16 dBm Min. - Measured 16.4 dBm
Unconditional Stability Stable for any magnitude and phase of source and load impedance.
Out of Band Gain Shall be no greater than 2 dB higher than the gain inside the operating band.
Input / Output VSWR

Input 2.5:1 Max. - Measured 1.44:1

Output 2.3:1 Max - Measured 1.76:1

Maximum Input Level +20 dBm Min.
DC Power +12 @ 200 mA Max. - Measured 198 mA
Power Supply Variations ±0.5 V
RF Leakage Levels -60 dBm

Environmental Ratings:

 Altitude:
 Sea Level to 40,000 ft. ASL Non-Operating
 Sea Level to 15,000 ft. ASL Operating
 Temperature:  -10º C to +70º C Operating
 -54º C to +85º C Non-Operating
 Humidity: 100% relative humidity +30º C to +55º C with condensation, 240 hr. exposure.
 Fungus: No fungus nutrient materials used.
 Salt and Fog: MIL-STD-810, method 509.2, 48 hr exposure
 Vibration, Sinusoidal

0.2" (double amplitude) from 5-14 Hz

2.0 G from 14 to 33 Hz.

 Vibration, Random: 0.04 g sq/Hz from 60 Hz to 350 Hz, decreasing at 3 dB per octave from 60 to 20 Hz and 350 Hz to 2kHz, 6 grms total.
 Functional Shock: 30 G (6 Shocks per axis, 6-9 ms duration)
 Explosive Atomosphere: MIL-STD-810, method 511.2
 ESS: EDI RSS Specification 122026 Paragraph 4.2