Model: PE2-30-0R56R0-5R0-22-12-SFF   


PMI Model No. PE2-30-0R56R0-5R0-22-12-SFF is a 500MHz to 6.0GHz low noise amplifier that typically provides 30dB of gain. The gain flatness is ±1.0dB maximum with a noise figure is 5.0dB typical. This amplifier provides a minimum OP1dB of +21dBm. The VSWR is 2.0:1 maximum into 50 ohms impedance and operates on a single DC supply of +12 to +15 volts with 325mA nominal current consumption. This unit is supplied with field removable SMA female connectors and in our standard PE2 housing that measures 1.08" x 0.71" x 0.29".

Quick Links: (click the links below for additional information)

Product Feature

Test Report

Unit Data






Frequency Range 0.5 to 6.0 GHz
Gain 30 dB typ. - Measured 30 dB
Gain Flatness ±1.0 dB max. - Measured ±0.39 dB
Noise Figure 5.0 dB typ. - Measured 4.24 dB

+22 dBm typ., +21 dBm min. - Measured 23 dB

VSWR In/Out 2.0:1 max. - Measured 1.42:1/1.95:1
DC Voltage Supply +12 to +15
DC Current Draw 325 mA nominal - Measured 292 mA
RF Connectors SMA (F) - Field Removable
Housing PE2
Finish Gold Plated

Environmental Ratings:

Temperature:  -55ºC to +85 ºC Operating
 -65ºC to +125 ºC Non-Operating
 Humidity:  MIL-STD-202F, Method 103B Cond. B
 Shock:  MIL-STD-202F, Method 213B Cond. B
 Altitude:  MIL-STD-202F, Method 105C Cond. B
 Temperature Cycle:  MIL-STD-202F, Method 107D Cond. A