Integrated LNA Assembly Featuring Internal Limiter, Band Pass Filter and RF Blanking Switch
PMI Model PEC-18-2D35G-1R75-9-SFF-BPF-HS-LM is an integrated module combining an input limiter, low noise amplifier, band pass filter, RF blanking switch and limiting output stage. The frequency passed is 2350 MHz with a 1dB bandwidth of 150 MHz. This model has a typical gain of 18 dB. The output power is limited to +2dBm maximum while the input can handle up to +30dBm CW.
Quick Links: (click the links below for additional information)
Specifications: |
Value: |
Filter Center Frequency: |
2350MHz |
Filter Rejection: |
-30dBc min. @ 2100 & 2600MHz |
Filter Bandwidth: -1dB |
150MHz typ. |
Gain: |
18dB typ. |
Noise Figure: |
2.0dB max. |
Limited Output Power: |
+2dBm max. |
Input Power: |
+30dBm CW max. |
RF Blanking Switch Range: |
40dB min. |
RF Blanking Switch Speed: |
100nsec max. |
RF Blanking Switch Control: |
RS422 Differential |
VSWR: |
2.0:1 max. |
Operating Voltage: |
+9VDC |
Operating Current: |
100mA typ. |
RF Connectors: |
SMA(F) |
DC & Control Connector: |
Micro-D 9-Pin Male |
RF Connectors: |
SMA(F) |
Sealing: |
Hermetic |
Size: |
4.3"L x 1.55"W x 1.00"H |
Environmental Ratings:
| Temperature: | -55ºC to +85ºC Operating |
| -65ºC to +125ºC Non-Operating | |
| Humidity: | MIL-STD-810F, Method 507.4 |
| Shock: | MIL-STD-810F, Method 516.5 |
| Vibration: | MIL-STD-810F, Method 514.5 |
| Altitude: | MIL-STD-810F, PROCEDURE II |
| Temperature Cycle: | MIL-STD-810F, Method 503.4 PROCEDURE I |
 |
.