P2T-100M40G-110-T-512-292FF

PMI Model No. P2T-100M40G-110-T-512-292FF is an absorptive, single pole, two throw pin diode switch that operates over the frequency range of 0.1 to 40.0GHz. This model incorporates a TTL compatible driver for easy system integration.

Product Specifications

General Parameters:
Status: Active
Frequency Min: 0.1 GHz
Frequency Max: 40 GHz
Insertion Loss (Typ): 6.5 dB
Isolation (Typ): 110 dB
Reflective / Absorptive: Absorptive
Switching Speed (Typ): 100 nsec
Frequency: 0.1 to 40.0 GHz
Configuration: SP2T
Operating Temperature: -40 to +85 ºC
Isolation: 110dB typ, 100dB min (0.3 to 18.0GHz), 100dB typ, 90dB min (18.0 to 26.5GHz), 90dB typ, 80dB min (0.1 to 0.3 & 26.5 to 40.0GHz)
Insertion Loss: 6.5dB max, 4dB typ (0.1 to 18.0GHz), 5dB typ (18.0 to 26.5GHz), 5.5dB typ (26.5 to 40.0GHz), 9dB Max. (0.1 to 0.3GHz @ 20dBm IN)
VSWR In/Out: 2.5:1 max, 2.0:1 typ
Input Power: +20dBm CW max
Switching Speed: 100nsec max
Control Signal: TTL Logic
Power Supply: +5VDC @ 120mA typ, -12VDC @ 65mA typ
Connectors: 2.92(F)
Power & Control Connector: Solder Pins
Size: 1.2" x 1.0" x 0.5"
Finish: Gold Plated
Non-Operating Temperature: -55 ºC to +125 ºC
Humidity: MIL-STD-202F, Method 103B Cond. B
Shock: MIL-STD-202F, Method 213B Cond. B
Vibration: MIL-STD-202F, Method 204D Cond. B
Altitude: MIL-STD-202F, Method 105C Cond. B
Temperature Cycle: MIL-STD-202F, Method 107
Salt Fog: MIL-STD-202F, Method 107D Cond A
Fungus: MIL-STD-810C, Method 508.2