PMI Model No. P4T-10G40G-60-T-292FF is a SP4T Solid-State, Absorptive Switch that operates from 10 to 40GHz. This model offers over 60dB of isolation and less than 6dB insertion loss. The rise time is less than 15nsec and the fall time is less than 5nsec typically. This model is designed to operate with input power levels up to +23dBm CW. The DC Supply is +5V, 75mA and -5V, 45mA typically. The housing measures 1.25” x 1.25” x 0.50” and is supplied with 2.92mm Female connectors.

Product Specifications

General Parameters:
Status: Active
Frequency: 10.0 to 40.0 GHz
Insertion Loss (Typ): 6 dB
Isolation (Typ): 60 dB
Reflective / Absorptive: Absorptive
Switching Speed (Typ): <100
Configuration: SP4T
Operating Temperature: -55 to +85 ºC
Isolation: 60 dB min - Measured 69.58 dB
Insertion Loss: 6 dB Max - Measured 5.62 dB
Insertion Loss Flatness: ±1.5 dB Typ over full band - Measured 1.47 dB
VSWR In/Out: 2.0:1 Max - Measured 1.98:1 IN, 1.96:1 OUT
Input Power: >200mW CW max. (+23dBm CW)
Switching Speed: 10% to 90% <100 ns - Measured 30 ns
Control Signal: 2-BIt Decoded TTL Logic
Power Supply: +5 VDC @ 100 mA Typ - Measured 75 mA -5 VDC @ 100 mA Typ - Measured 43 mA
Connectors: 2.92mm (F)
Power & Control Connector: Solder Pins
Size: 1.25" x 1.25" x 0.5"
Finish: Gold Plated
Non-Operating Temperature: -65ºC to +125 ºC
Humidity: MIL-STD-202G, Method 103B Cond. B
Shock: MIL-STD-202G, Method 213B Cond. B
Vibration: MIL-STD-202G, Method 204D Cond. B
Altitude: MIL-STD-202G, Method 105C Cond. B
Temperature Cycle: MIL-STD-202G, Method 107D Cond. A