P6T-2G18G-60-T-512-SFF-LV

PMI Model No. P6T-2G18G-60-T-512-SFF-LV is a single pole, six throw, absorptive, low video transient, solid state switch operating over the frequency range of 2.0 to 18.0GHz. This model has a maximum insertion loss of 4.0dB and a minimum isolation specification of 60dB with video transients of 2mV typically. It operates at 23dBm CW maximum and has a survival specification of 27dBm CW maximum and offers a typical switching speed of 30ns. The unit is supplied with removable SMA(F) connectors in a hermetically sealed housing that measures 1.5" x 2.0" x 0.4"

Product Specifications

General Parameters:
Status: Active
Frequency: 2.0 to 18.0 GHz
Insertion Loss (Typ): 4 dB
Isolation (Typ): 60 dB
Reflective / Absorptive: Absorptive
Switching Speed (Typ): 50 nsec
Configuration: SP6T
Operating Temperature: -55 to +85 ºC
Isolation: 60dB max - Measured 78dB
Insertion Loss: 4 dB max - Measured 3.98 dB
VSWR In/Out: 2.0:1 max - Measured 2.00:1
Input Power: 23dBm CW max (Operating), 27dBm CW max (Survival)
Video leakage: 50 mV Peak-Peak max - Measured 2 mV Measured at 300 MHz BW
Switching Speed: 50 ns max - Measured 30 ns
Impedance: 50 Ohms - Measured 50 Ohms
Control Logic 0: 1.6 mA max SINK @ 0.4 V (Insertion Loss)
Control Logic 1: 40 uA max SOURCE @ 2.4 V (Isolation)
Control Signal: 6 Line TTL Logic
Power Supply: +5 VDC @ 300 mA typ - Measured 121 mA -12 VDC @ 100 mA typ - Measured 33 mA
Connectors: SMA (F) Removable
Size: 1.5" x 2.0: x 0.4"
Finish: Hermetic
Non-Operating Temperature: -60ºC to +125 ºC
Humidity: MIL-STD-202F, Method 103B Cond. B
Shock: MIL-STD-202F, Method 213B Cond. B
Vibration: MIL-STD-202F, Method 204D Cond. B
Altitude: MIL-STD-202F, Method 105C Cond. B
Temperature Cycle: MIL-STD-202F, Method 107D Cond. A