PMI Model No. PE2-40-100M18G-3R5-20-12-SFF is a 0.1 to 18.0GHz, Low Noise Amplifier which provides a minimum of 37dB of gain while maintaining a maximum gain flatness of +/-2.0dB over the operating frequency. The noise figure is typically 3.5dB from 2.0 to 18.0GHz and 7.0dB at 100MHz and offers a minimum OP1dB of +20dBm. The amplifier requires +14.5 to to +28VDC and has a nominal current draw of 525mA. The unit is supplied with removable SMA(F) connectors in our standard PE2 housing.

Product Specifications

General Parameters:
Status: Preliminary
Frequency Range: 0.1 to 18.0 GHz
Frequency Min: 0.1 GHz
Frequency Max: 18 GHz
Gain: 37 dB min
Gain (Measured): 37 dB Min - Measured 42.2 db, 45.7 dB
Gain Flatness: ±2.0 dB max.
Gain Flatness (Measured): ±2.0 dB Max - Measured ±1.75 dB
Noise Figure: 3.5 dB Typ (2.0 to 18.0 GHz) - Measured 3.88 dB 7.0 dB Typ (@ 100 MHz) - Measured 5.65 dB
VSWR In/Out: 2.3:1/ 2.5:1 Max - Measured 1.36:1/1.76:1
DC Voltage Supply: +14.5 to +28 VDC @ 525 mA nominal Measured +14.5 VDC @ 398 mA
OP1dB: +20 dBm Min - Measured +21.5 dBm
Connectors In/Out: SMA(F) Removable
Finish: Gold Plated
Environmental Ratings:
Temperature: -40ºC to +75ºC Operatingf-65ºC to +125 ºC Non-Operating
Humidity: MIL-STD-202F, Method 103B Cond. B
Shock: MIL-STD-202F, Method 213B Cond. B
Altitude: MIL-STD-202F, Method 105C Cond. B
Temperature Cycle: MIL-STD-202F, Method 107D Cond. A