TD-218-RB-OPT618-N12DMB

PMI Model No. TD-218-RB-OPT618-N12DMB is a threshold detector optimized for the 6.0 to 18.0GHz frequency range. It has an internally fixed threshold level of -12dBm ±2dBm with a low TTL output for single levels below the threshold setting. The threshold setting stability is constant ±3.0dB over the operating temperature and frequency range.

Product Specifications

General Parameters:
Status: Preliminary
Frequency Min: 6 GHz
Frequency Max: 18 GHz
Threshold: Fixed
Detected Output Type: TTL
Size: 1.5 x 1.5 x 0.5 Inches
Frequency Range: 6.0 to 18.0 GHz
VSWR: 2.75:1 (2-18 GHz)
Weight: 2.0 Ounces
Power Supply: +15V @ 250 mA Maximum
RF Connectors: The input signal connector shall be an SMA female in accordance with MIL-C-39012. The output signal connection shall be a solderable pin (ø 0.023" Minimum) with a ground lug next to it.
Threshold Level: Internally fixed to -12 ±2dBm at 12.0GHz
Threshold Setting Stability: ± 3.0 dB over the operating temperature and frequency range
Detected Output: The detected output signal shall be a TTL level high when the RF signal applied to the RF input exceeds the threshold level.
Maximum RF Input: +10 dBm (without damage)
Input Operating Range: -20 dBm to +10 dBm
Response Time: For any RF input greater than 3 dB above threshold, the maximum turn on response time measured at 90% RF to a TTL "1" output shall be 100 nS.
Operating Temperature: -55ºC to +85ºC
Non-Operating Temperature: -65 ºC to +125 ºC
Humidity: MIL-STD-202F, Method 103B Cond. B
Shock: MIL-STD-202F, Method 213B Cond. B
Vibration: MIL-STD-202F, Method 204D Cond. B
Altitude: MIL-STD-202F, Method 105C Cond. B
Temperature Cycle: MIL-STD-202F, Method 107D Cond. A