Preliminary Product Listing

Model: P2T-1G18G-10-R-12V-SFF-HIP10W  

 

PMI Model No. P2T-1G18G-10-R-12V-SFF-HIP10W is a reflective, single pole, two throw pin diode switch that operates over the 1.0 to 18.0GHz frequency range.  This model is capable of handling an input power level of 5 W CW while providing switching speeds of  less than 40 ns typically.  Port to Port isolation is 25 dB typically while providing low insertion loss of 2.5 dB typical. The DC power required is a single +12 VDC voltage with low current consumption of 50 mA maximum. This model incorporates a TTL compatible driver for easy system integration.

 

Quick Links: (click the links below for additional information)

Product Feature

 

Specifications:

Frequency 1.0 to 18.0 GHz
Isolation

10 dB Min.

Insertion Loss 4.0 dB Max., 3.0 dBm goal
VSWR In/Out 2.0:1
Operating Input Power 5 W CW Max.
(Not to be switched any higher than 50 kHz [PRI])
1dB Compression +40 dBm Goal
RF Switching Speed <40 ns Typ, 100ns Max.
Impedance 50 ohms
DC Voltage and Current

+12 VDC ±5% @ 50 mA Max.

Control Signal

TTL Logic

Connectors SMA(F) - Removable
Finish Painted Blue
Bottom side - Unpainted
Size 1.2" x 1.0" x 0.5"

 

Environmental Ratings:

Temperature:  -54 ºC to +100 ºC Operating
 -55ºC to +125 ºC Non-Operating
 Shock:  MIL-STD-202F, Method 213B Cond. B
 Vibration:  MIL-STD-202F, Method 204D Cond. B
 Altitude:  MIL-STD-202F, Method 105C Cond. B
 Temperature Cycle:  MIL-STD-202F, Method 107