Model: APD-8-30M6G-SFF

PMI MODEL APD-8-30M6G-SFF is a 30 MHz to 6.0 GHz amplified 8 way power divider module.  This module provides a nominal insertion loss of 6 dB with a  typical flatness of ±1 dB over the operating frequency range.  Over 36 dB of reverse isolation is provided with a typical noise figure of 6.5 dB and an input 1 dB compression of -2.5 dBm.  Input and Output VSWR is less than 2.0:1 into 50 OHM impedance.  The DC supply required is +12 to +15 volts and current draw is typically 48 mA.  Field removable SMA female connectors are utilized in a housing measuring 4.5” x 4.3” x 0.5”.

Quick Links: (click the links below for additional information)

Product Feature
Test Report

 

Specifications:

Frequency Range 30 MHz to 6.0 GHz
Outputs (J1-J8) to input (J9) Isolation

32 dB Min. - Measured 41 dB

36 dB Nominal

Insertion Loss

4 dB Min.- Measured 6.5 dB

6 dB Nominal

8 dB Max.

Insertion Loss Flatness ±1 dB Typ. - Measured ±1.37 dB
Noise Figure 6.5 dB Typ. - Measured 7.5 dB
VSWR (In/Out) 2.0:1 Max. - Measured 1.88:1 (Input)
1.49:1 (Output)
Input P1 dB -2.5 dBm Typ. - Measured >-2.5 dBm
Power Rating +10 dBm Max.*
Connectors In/Out SMA (F)
DC Voltage +12 to +15 VDC @ 100 mA Nominal
- Measured
48 mA
Finish Painted Blue

*Note:  +24 dBm (5 minutes Max)

 

Environmental Ratings:

Temperature:  -40 ºC to +85 ºC Operating
 -55 ºC to +100 ºC Non-Operating
 Humidity:  MIL-STD-202F, Method 103B Cond. B
 Shock:  MIL-STD-202F, Method 213B Cond. B
 Vibration:  MIL-STD-202F, Method 204D Cond. B
 Altitude:  MIL-STD-202F, Method 105C Cond. B
 Temperature Cycle:  MIL-STD-202F, Method 107D Cond. A