Model: SDLVA-100M3G-70-MAH
 
 

    

 

PMI Model No: SDLVA-100M3G-70-MAH is a Successive Detection Log Video Amplifier operating in the 0.1 to 3.0GHz frequency band.  it features an SPST on the RF output wich allows for the RF to be blanked when the RF input signal is below the -64dBm threshold.  In addition to RF blanking, a 3.3V TTL-compatible output is also provided for time-gating or sampling, to assist in digital system integration.

Quick Links: (click the links below for additional information)

Product Feature
Test Report


Unit Data

  PL13612
  PL14753

Specifications:

Frequency Range 0.1 to 3.0 GHz
Frequency Flatness ±2.0 dB max. - Measured ±1.4 dB
TSS -68 dBm min., -70 dBm typ. - Measured -68 dBm
Limited Output Power 6.5 dBm ±3.0 dB max. - Measured 4.85 dBm
Linear Output Gain 38 dB ±3.0 dB max. - Measured 40 dB
Linear Output Psat 6 dBm ±3.0 dB max. - Measured 5.97 dBm
VSWR 2.0:1 max. - Measured 1.28:1
V0 (Video Comparator Signal Amplitude) 3.3 V typ. - Measured 3.5 V
Video Comparator Delay 50 ns typ. - Measured 25 ns
Video Comparator Threshold Level -64 dBm ± 3.0 dB max. - Measured -63 dBm
V1 (Log Video Signal Amplitude) 1 V max. - Measured 0.8 V
Log Slope 10 mV/dB into a 50 Ohm Load (±1mV) max. - Measured 9.8 mV/dB
Log Range -65 to +5 dBm min. - Measure -65 to 5 dBm
Log Linearity ±1.50 dB ( -40ºC to +85 ºC) max. - Measured ±1.40 dB
Pulse Range 100 ns to CW - Measured 100 ns to CW
Rise Time 35 ns max. - Measured 26.5 ns
Settling Time to ±1dB 50 ns typ. - Measured 45 ns
Recovery Time 200 ns max. (150ns typ.) - Measured 200 ns
SPST Isolation 70 dB typ. - Measured 70 dB
SPST Switch Speed 20 ns typ. - Measured 20 ns
Power Supply

±12 VDC to ±15 VDC -

Measured +12 VDC @ 234 mA

Measured -12 VDC @ 84 mA

Measured +15 VDC @ 197 mA

Measured -15 VDC @ 93 mA

Dimensions 2.30" x 2.20" x 0.36"
Connectors SMA Female
Finish Gold Plated

Environmental Ratings:

Temperature:  -40ºC to +85 ºC Operating
 -54 ºC to +100 ºC Non-Operating
 Humidity:  MIL-STD-202G, Method 103B Cond. B
 Shock:  MIL-STD-202G, Method 213B Cond. B
 Vibration:  MIL-STD-202G, Method 204D Cond. B
 Altitude:  MIL-STD-202G, Method 105C Cond. B
 Temperature Cycle:  MIL-STD-202G, Method 107D Cond. A