Model: Model: P2T-10M6G-45-R-5V-SFF-HIP20W

 

PMI Model No. P2T-10M6G-45-R-5V-SFF-HIP20W is a Reflective, Single Pole, Two Throw Pin Diode Switch that operates over the 10 to 6000 MHz frequency range.  This model is capable of handling an input power level of 20 watts CW while providing switching speeds of <100 ns and requires a single +5 VDC supply.  This model incorporates a TTL compatible driver for easy system integration.

 

Quick Links: (click the links below for additional information)

Product Feature


Typical Characteristics

Specifications:

Frequency 10 to 6000 MHz
Isolation

25 dB Typ, 20 dB min.

Measured

70 dB @ 0.01 GHz
46 dB @ 0.5 GHz
22.86 dB @ 6 GHz

Insertion Loss 2.5 dB Typ, 2.8 dB Max – Measured 2.51 dB
VSWR In/Out 2.0:1 typ. - Measured 2.3:1
Operating Input Power 20 Watts CW Max – Tested to 25 Watts CW
(Not to be switched any higher than 50 kHz)
RF Switching Speed

100 ns Max – Measured 61.6 ns

(50% TTL to 10%/90% RF)

Impedance 50 OHMS
DC Voltage +5 V @ 30 mA Typ - Measured 45 mA
Control Signal

TTL Logic

Connectors

SMA (F) - Removable

Control Connectors Solder Pins
Finish Painted Blue
(Bottom side to be unpainted - silver plated)

 

Environmental Ratings:

Temperature: -54 ºC to +85 ºC Operating
 -55 ºC to +125 ºC Non-Operating
 Shock:  MIL-STD-202F, Method 213B Cond. B
 Vibration:  MIL-STD-202F, Method 204D Cond. B
 Altitude:  MIL-STD-202F, Method 105C Cond. B
 Temperature Cycle:  MIL-STD-202F, Method 107D