Model: P2T-6G18G-25-T-TFF-100W-TERM

PMI Model No. P2T-6G18G-25-T-TFF-100W-TERM is a single pole, two throw, absorptive switch designed to operate over the 6.0 to 18.0 GHz frequency range.  This model is designed to handle 100 watts average input power with the absorptive section rated to handle 10 watts CW.   The switch offers fast switching speeds of 1 µs maximum, low insertion loss of 2.0 dB typically and high isolation of 25 dB minimum.  These units offer phase tracking of less then ±5°.  The DC supplies are +28 VDC and ±5 VDC.  The housing measures 1.79” x 0.60” x 2.03” and is supplied with TNC Female connectors.


Quick Links: (click the links below for additional information)

Product Feature




Frequency 6.0 to 18.0 GHz
Insertion Loss

2.0 dB Typ

2.6 dB Max

Isolation 25 dB Min
Phase Tracking ±5°
Switching Speed 1µs Max
Power Handling

100 Watts CW Min (Terminated Section will handle 10 Watts CW Max)

Mounting Temperature

50 °C, Mounting Surface to be Gold Plated


2.0:1 Max.


2 Bit TTL

0 = Isolation

1 = Low Loss

Bias +28 VDC & ±5 VDC
RF Connectors TNC Female
Power & Control Connector 9 Pin Micro-D Female, Mating with M83513/03A/03C
Size 1.78" x 0.60" x 2.03"
Finish Gold Plated
Switching Type:

Cold Switching


Environmental Ratings:

Temperature -55ºC to +85 ºC Operating
-65ºC to +125 ºC Non-Operating
Humidity MIL-STD-202, Method 103B, Cond B
Shock MIL-STD-202, Method 213B, Cond B
Vibration MIL-STD-202, Method 204D, Cond B
Altitude MIL-STD-202, Method 105C, Cond B
Temperature Cycle MIL-STD-202, Method 107D, Cond A