P4T-500M40G-60-T-55-292FF-SP Rev.B *

Buy Now

PMI Model No. P4T-500M40G-60-T-55-292FF-SP Rev.B is a 500MHz to 40GHz, Ultra-Compact, High Speed, Single Pole, Four Throw, Absorptive Switch. This switch offers over 60dB of port to port isolation while maintaining an insertion loss of 8dB maximum. The switching speed is less than 50nsec and is controlled by 2-Bit decoded TTL. The maximum operating power is +20dBm CW and the VSWR is 2.5:1 maximum. The compact housing measured only 2.0" x 1.0" x 0.4" and is supplied with 2.92mm female connectors.

Product Specifications

General Parameters:
Status: Active
Frequency: 0.5 to 40.0 GHz
Frequency Min: 0.5 GHz
Frequency Max: 40 GHz
Insertion Loss (Typ): 6.56 dB
Isolation (Typ): 74.66 dB
Reflective / Absorptive: Absorptive
Switching Speed (Typ): 50 nsec
Configuration: SP4T
Isolation: 60 dB min. - Measured 74.66 dB
Insertion Loss: 8.0 dB max. - Measured 6.56 dB
VSWR In/Out: 2.5:1 max., 2.0:1 typ. - Measured 1.95:1 In, 1.92:1 Out
Input Power: +20 dBm CW max.
Survival Power: 1 W Peak 1us
Switching Speed: Rise: 15ns Max
Fall: 15ns Max
Delay On: 50ns Max
Delay Off: 50ns Max
Rise/Fall Time: 15 ns max. - Measured 5 ns max.
Delay On/Off: 50 ns max. - Measured 20 ns max.
Control Signal: 2-Bit Decoded TTL
Power Supply: +5 VDC @ 250 mA max. - Measured 125 mA -5 VDC @ 100 mA max. - Measured 70 mA
Connectors: 2.92 mm (F)
Power & Control Connector: Solder Pins
Size: 2.0" x 1.0" x 0.4"
Finish: Gold Plated
Environmental Ratings:
Operating Temperature: -40ºC to +85 ºC
Non-Operating Temperature: -55ºC to +125 ºC
Humidity: MIL-STD-202F, Method 103B Cond. B
Shock: MIL-STD-202F, Method 213B Cond. B
Vibration: MIL-STD-202F, Method 204D Cond. B
Altitude: MIL-STD-202F, Method 105C Cond. B
Temperature Cycle: MIL-STD-202F, Method 107
SourceIn StockPurchase
4 Buy Now