General Parameters: |
Status: | Active |
Product Description: | Quantic PMI Model No. PMOD-PWR-1030M-ATN-SFF is a power detector module. The operating frequency is 1030 ± 0.01 MHz. Two pairs of forward and reverse signals are input allowing for a 12 bit linear digital output proportional to the input power. A GUI is provided to interface through ethernet and allow MCU programming, unit calibration and setting of the variable attenuators. |
Item No.: | 53 |
Finish: | Painted Blue |
DC Power: | +5 VDC +/-5% +15 VDC +/-5% -15 VDC +/-5% |
Sigma Input Signal: Frequency: | 1030 ± 0.01 MHz |
Forward Input Power (J1): | +37.16 dBm ±5 dB (+50 dBm No Damage) |
Reverse Input Power (J2): | +22.21 dBm ±1 dB (+35 dBm No Damage) |
Omega Input Signal: Frequency: | 1030 MHz ± 0.01 MHz |
Forward Input Power (J3): | +40.83 dBm ±2 dB (+50 dBm No Damage) |
Reverse Input Power (J4): | +15.42 dBm ±2.5 dB (+35 dBm No Damage) |
Pulsewidth: | 38 µs |
Amplitude: | 0 to 5 VDC |
Impedance: | 75 Ohms |
GUI: | - Interfaces with unit through ethernet connection - Allows setting of variable attenuators - Allows calibration of power detectors - Allows programming calibration table to microcontroller without need for additional hardware |
ER/MNTRVID (J5): | 0 to 5 VDC Amplitude |
Digital Control Lines (Other than ER/Sync): | TTL Differential Pairs |
J1, J2, J3, J4, J5, J11 Connectors: | SMA (F) |
J6 Connector: | 15 Pin Sub-Miniature D Male |
J8, J9 Connectors: | 37 Pin Sub-Miniature D Male |
J7 Connector: | Molex 0878331031 or Equivalent |
J10 Connector: | Ethernet / RJ45 |
Environmental Ratings: |
Temperature: | -20 ºC to +55 ºC (Operating) -40 ºC to +85 ºC (Storage) |
Humidity: | 0% to 100% Including condensation due to temperature changes |
Altitude: | 0 to 10,000 Feet Above Sea Level |
EMI: | MIL-STD-461F CE102 |