P3T-500M40G-60-T-55-292FF * Active

High Speed, SP3T, Absorptive Switch

Buy Now
Additional Documents

PMI Model No. P3T-500M40G-60-T-55-292FF is a high speed, single pole, three throw, absorptive switch capable of switching within 50 ns. The frequency range is 0.5 to 40.0 GHz and has over 60 dB of isolation.

Product Specifications

General Parameters:
Status: Active
Frequency: 0.5 to 40.0 GHz
Frequency Min: 0.5 GHz
Frequency Max: 40 GHz
Insertion Loss (Typ): 6 dB
Isolation (Typ): 60 dB
Reflective / Absorptive: Absorptive
Switching Speed (Typ): 50 ns
Configuration: SP3T
Isolation: 60 dB Min - Measured 71.53 dB
Insertion Loss: 6.0 dB Typ - Measured 6.83 dB
VSWR In/Out: 2.0:1 Typ. - Measured 2.4:1
Input Power: +20 dBm CW - Measured +20 dBm
Survival Power: 1 W Peak 1 µs - Measured 1 W Peak
Switching Speed: Rise: 15 ns Typ
Fall: 15 ns Typ
Delay On: 50 ns Typ
Delay Off: 50 ns Typ
Control Signal: 2-Bit Decoded TTL
Power Supply: +5 VDC @ 200 mA - Measured 35 mA
-5 VDC @ 100 mA - Measured 15 mA
Connectors: 2.92mm (F)
Power & Control Connector: Solder Pins
Size: 1.0" x 1.0" x 0.5"
Finish: Painted Gray
Features: Ultra-Broadband Performance, Low Insertion Loss, High isolation, Fast Switching Speed, Small Size
Environmental Ratings:
Operating Temperature: -40 ºC to +85 ºC
Non-Operating Temperature: -55 ºC to +125 ºC
Humidity: MIL-STD-202F, Method 103B Cond. B
Shock: MIL-STD-202F, Method 213B Cond. B
Vibration: MIL-STD-202F, Method 204D Cond. B
Altitude: MIL-STD-202F, Method 105C Cond. B
Temperature Cycle: MIL-STD-202F, Method 107D Cond. A
SourceIn StockPurchase
19 Buy Now