PMI's Amplifier Products

LCA Series  |  Narrow Band  |  Octave & Half Octave  |  Broadband & Multioctave  | Ultra-Broadband  |  Variable Gain  |  Wave Guide

  Gain Correction & Multi-Function  |  Limiting  |  Portable Test Bench  |  High IP SIGINT  |  In-Stock Products

     

PMI offers a full line of RF and Microwave Amplifiers that range from 250kHz up to 40.0GHz.  Many options are available.  If you do not see exactly what you require on this web site please contact us because we offer amplifiers designed and built to your specifications at catalog prices.

Features that are supplied with all of our amplifiers:

  • Internal Voltage Regulation for +12 to +15VDC Operation

  • Internal Reverse Voltage Protection

  • Unconditional Stability

  • Each unit has a unique serial number and date code.

  • Swept Data with each unit. (S21, S11, S22 and Noise Figure)

  • Summary data sheet with each unit.

  • Operating Temperature -20 to +70°C

Amplifier Options:

Modified internal voltage regulators for +28VDC operation

Any package or form factor can be supplied (Usually without a NRE charge)

Connector types can be specified.

Gain and OP1dB values can be optimized to meet your requirement.

Operating temperature ranges can be increased to -54°C to +85°C.

All amplifiers can be optimized to your specific frequency of interest.

Temperature Compensation is available on all amplifiers.

Hermetic Sealing is available.  Standard catalog amplifiers are sealed with a conductive epoxy.

Military or Space Screening is available.

Gain and Phase matching is available on most amplifiers.

Standard PMI Housings:

PE2

PE2 without carrier

PE2 in Cascade

PE10

PE13
PE13 without carrier

PEC1

PEC2

PEC3

Custom housing are always available.

Note: Other PMI Amplifiers can be seen by visiting the links below:

http://www.planarmonolithics.com/toc/videobufferamps.htm

http://www.planarmonolithics.com/toc/hpa.htm

http://www.planarmonolithics.com/toc/lna.htm