ERDLVA-2G8G-65-70MV Active

CW Immune EW Detector Module (ERDLVA)

Quantic PMI Model No. ERDLVA-2G8G-65-70MV is a 2 to 8 GHz, CW immune ERDLVA that features an internal switch used to switch between the BIT IN and RF In with input blanking on both ports. The video output is designed to drive a 150 ft cable.

Product Specifications

General Parameters:
Type: DLVA
Status: Active
Frequency Range: 2 to 8 GHz
Frequency Min: 2 GHz
Frequency Max: 8 GHz
TSS: -71 dBm
TSS (Measured): -71 dBm
Size: 2.82” x 2.25” x 0.5”
Log Slope: 70 ± 3 mV/dB
Log Range: -65 to 0 dBm
Log Linearity: ±1.0 dB Max
Rise Time: 28 ns Max (10-90% @ -40 & -10 dBm)
Fall Time: 300 ns Max (@ -40 & -10 dBm)
Recovery Time: 500 ns Max (From 90% to within 1 dB of baseline)
Settling Time: 50 ns Max (From 10% to within 35 mV of final value @ -40 & -10 dBm)
Power Supply: +15 V ±5% @ 0.5 A Max,
-15 V ±5% @ 0.2 A Max
Finish: Gray Paint
VSWR: 2.3:1 Max
RF Connectors: RF & Video: SMA (F)
DC Power & Control: 9 Pin D-Sub (F)
Video Load Impedance: 95 ± 1 Ohms
Maximum Input Power(CW): 1 W CW, 100 W Peak @ PW = 1 µs & 1% Duty
Propagation Delay: 80 ns Max from 50% RF to 10% Video
DC Offset: 0 to 100 mV
Dynamic Range: -65 to 0 dBm
Leakage Level: 5000 H @ 50 ºC
Isolation: 60 dB Min, All Ports
Switching Speed: 100 ns Max
Video Frequency Flatness: ±1.25 dB Max @ 25ºC
Log Accuracy: ±1.25 dB Max
Baseline Shift with CW: 200 mV Max @ -40 dBm CW
Absolute Log Accuracy: ±2.0 dB Max
Pulse Width Process Range: 100 ns to 100 µs
Video Output @ -68 dBm: 330 ± 88 mV for all frequencies
Video Output Drive Capability: Driving 100 ft RG180 into 95 Ohms load
Pulse Density Capability: 20% Duty @ 100 ns PW, 70% Duty @ 100 µs PW
Noise Level: 30 mV RMS Max
CW Immune Time: 4 ms Max
Ripple: 100 mV Max
Environmental Ratings:
Operating Temperature: -10 ºC to 85 ºC
Thermal Shock: -10 ºC to +85 ºC, 10 Cycles 1 hour dwell time at each temp, rate of temp change 15ºC/MIN