Buy Now

PMI Model No. APT3-03100350-0807-D5S is an ultra low noise amplifier that operates over the 3.1 to 3.5 GHz frequency range. The maximum noise figure is 0.8 dB and offers a maximum VSWR of 1.35:1 at the input and output. These amplifiers are phase matched to within ±8.0 degrees and are phase tracked to within 4.0 degrees.

Product Specifications

General Parameters:
Status: Active
Frequency Min: 3.1 GHz
Frequency Max: 3.5 GHz
Gain: 28 ± 0.6 dB
Gain Flatness: ±0.2 dB (Over any 40 MHz Segment)
Noise Figure: 0.8 dB max.
Connectors: SMA (M)/SMA (F)
VSWR In/Out: 1.35:1 max.
OP1dB: +7.6 dBm min.
DC Voltage: +15 VDC
DC Current Draw: 150 mA nominal
Impedance: 50 Ohms
DC Supply: +15 VDC @ 150 mA nominal
Phase Matching: The difference in insertion phase from the phase versus frequency characteristics shall not exceed ±8.0 degrees for input signals up to -25 dBm
Phase Tracking: Over 40 MHz segments of the RF band the insertion phase shall track the phase versus frequency characteristics within 4.0 degrees for input levels up to -25 dBm
Environmental Ratings:
Operating Temperature: 0°C to +45°C
Non-Operating Temperature: -62°C to +75°C
Humidity: 0 to 95% RH
Shock: 50G, 11 ms sawtooth-pulse, any direction
Vibration: No resonance between 5.0 to 25.0 Hz. Capable of withstanding continuous vibration of 1.3 g's at 25 Hz for a period not less than 2 hours in any direction, without degradation.
SourceIn StockPurchase
2 Buy Now