| General Parameters: |
|---|
| Type: | DLVA |
|---|
| Status: | Preliminary |
|---|
| Frequency Range: | 2 to 8 GHz |
|---|
| Frequency Min: | 2 GHz |
|---|
| Frequency Max: | 8 GHz |
|---|
| TSS: | -71 dBm |
|---|
| Size: | 2.25" x 2.69" x 0.40" |
|---|
| Log Slope: | 70 ± 3 mV/dB |
|---|
| Log Range: | -65 to 0 dBm |
|---|
| Log Linearity: | ±1.0 dB Max |
|---|
| Rise Time: | 28 ns Max (10 to 90% @ -40 & -10 dBm) |
|---|
| Fall Time: | 300 ns Max (@ -40 & -10 dBm) |
|---|
| Recovery Time: | 500 ns Max (From 90% to within 1 dB of Baseline) |
|---|
| Settling Time: | 50 ns Max (From 10% to within 35 mV of Final Value @ -40 & -10 dBm) |
|---|
| Finish: | Gray Paint, No Paint on Mounting Surface |
|---|
| Propagation Delay: | 80 ns Max from 50% RF to 10% Video |
|---|
| DC Offset: | 0 to 100 mV |
|---|
| Dynamic Range: | -65 to 0 dBm |
|---|
| Isolation: | 60 dB Min All Ports |
|---|
| Switching Speed: | 100 ns Max |
|---|
| Video Frequency Flatness: | ±1.25 dB Max @ 25 °C |
|---|
| Log Accuracy: | ±1.25 dB Max @ 25 °C |
|---|
| Absolute Log Accuracy: | ±2.0 dB Max |
|---|
| Pulse Width Process Range: | 100 ns to 100 µs |
|---|
| Video Output Drive Capability: | Driving 100 ft. RG180 into 95 Ohms Load |
|---|
| Pulse Density Capability: | 20% Duty @ 100 ns PW, 70% Duty @ 100 µs PW |
|---|
| Noise Level: | 30 mV RMS ax |
|---|
| DC Power: | ±15 V ± 5% @ 0.4 A Max
±15 V ±5% @ 0.2 A Max |
|---|
| Stabilization Bake: | 24 hours @ +85 °C |
|---|
| Burn In: | 48 hours @ +85 °C DC Power On |
|---|
| Input VSWR: | 2.3:1 Max |
|---|
| Maximum Input Power: | 1 W CW, 100 W Peak @ PW = 1 µs & 1% Duty |
|---|
| Ripple from DC to 10 MHz: | 100 mV Max |
|---|
| CW Immune Time at CW = -40 dBm: | 4 ms Max |
|---|
| CW Recovery Time at CW = -40 dBm: | 120 µs Max |
|---|
| Pulse Droop: | 70 mV Max for PW 100 µs (@ -65 dBm) |
|---|
| MTBF: | 5000H @ 50 °C |
|---|
| Video Output Load Impedance: | 95 ± 1 Ohms |
|---|
| Video Output @ -65 dBm: | 330 ± 88 mV for All Frequencies |
|---|
| Baseline Shift: | 200 mV @ -40 dBm CW |
|---|
| Pulse Amplitude Loss with Pulse Power: | -30 dBm @ CW Power = -50 dBm,
No Loss @ CW Power = -40 dBm,
2 dB Loss max. |
|---|
| Immune Power (CW): | TSS to -40 dBm |
|---|
| Connectors: | RF & Video: SMA (F)
DC Power & Control: 9 Pin D-Sub (F) |
|---|
| Environmental Ratings: |
|---|
| Operating Temperature: | -10 °C to +85 °C |
|---|
| Thermal Shock: | -10 °C to +85 °C, 10 Cycles 1 hour Dwell Time at Each Temp, Rate of Temp Change 15°C/min. |
|---|
| Random Vibration: | 20 Hz to 2000 Hz, Random 16.8 grms in all 3 Axis for 15 minutes min. |
|---|