| General Parameters: |
|---|
| Status: | Preliminary |
|---|
| CW Immune (Yes/No): | Yes |
|---|
| Frequency Min (GHz): | 2 |
|---|
| Frequency Max (GHz): | 18 |
|---|
| TSS (dBm): | N/A |
|---|
| Log Slope (mV/dB): | 50 ± 4.5% |
|---|
| Log Range (dBm): | -47 to +4 |
|---|
| Log Linearity: | ±1.0 dB up to 0 dBm,
±2.0 dB from 0 to +4 dBm |
|---|
| Rise Time: | 23 ns Max (10% to -3 dB of final value 10 µs PW) |
|---|
| Fall Time: | 100 ns Max 90% to 50% |
|---|
| Recovery Time: | 500 ns Max for PW <10 µs PWR <-5 dBm,
1.0 µs for PW >10 µs, PWR >0 dBm
(from 90% to within 3 dB of level detected without the first pulse) |
|---|
| Settling Time: | 500 ns Max for PW < 10 µs, PWR <-5 dBm,
1.0 µs FOR PW >10 µs, PWR >0 dBm
(from 90% to within 3 dB of baseline level) |
|---|
| Power Supply: | +12 ± 0.6 VDC @ 300 mA
-12 +/- 0.6 VDC @ 170 mA |
|---|
| Dynamic Range Log: | -47 to +4 dBm |
|---|
| Output Noise: | 40 mV RMS Max @ 20 MHz Bandwidth |
|---|
| Duty Cycle: | 50% Max |
|---|
| Frequency Flatness: | ±2.5 dB Max |
|---|
| VSWR: | 2.0:1 Max |
|---|
| Video Load (Ohms): | 100 |
|---|
| Propagation Delay: | 25 ns Max from 50% RF to 10% VIDEO |
|---|
| Pulse Width Range: | 50 ns to 500 µs |
|---|
| Signal Capability: | 300 mV above baseline level Min |
|---|
| Input Power: | +20 dBm CW or Pulsed |
|---|
| Pulse Overshoot: | 2 dB up to 10 µs PW |
|---|
| Control & DC Supply connector: | RF INPUT: SMA Female
DC & VIDEO Solder Pins |
|---|
| Output Pulse Peak Variation Vs. Duty Cycle: | +/- 1.0 dB Max |
|---|
| Pulse Droop: | 1.0 dB @ 500 µs PW |
|---|
| Baseline DC Offset: | 0 V ± 50 mV with no RF applied |
|---|
| Size: | 2.44" x 1.33" x 0.472"
62 mm x 34 mm x 12 mm |
|---|
| Finish: | Nickel Plated |
|---|
| Weight: | 2.2 oz (65 g) +/- 5% |
|---|
| Export Classification (ECCN): | EAR99 |
|---|
| Environmental Ratings: |
|---|
| Operating Temperature: | -50 °C to +100 °C |
|---|
| Non-Operating Temperature: | -60 °C to +100 °C |
|---|
| Thermal Shock: | MIL-STD-810, METHOD 503 |
|---|
| Humidity: | MIL-STD-810, METHOD 507 |
|---|
| Shock: | MIL-STD-810, METHOD 516 TEST PREOCEDURE 1 |
|---|
| Vibration: | MIL-STD-810, METHOD 514 |
|---|