ERDLVA-0R5G2G-CW-75MV-93 Active

CW Immune Extended Range Detector Log Video Amplifier (ERDLVA)

Quantic PMI Model ERDLVA-0R5G2G-CW-75MV-93 is a CW immune extended range detector log video amplifier (ERDLVA) that operates between the 0.5 to 2.0 GHz frequency range with a log slope of 75 mV/dB time of 25 ns.

Product Specifications

General Parameters:
Type: DLVA
Status: Active
Frequency Range: 0.5 to 2 GHz
Frequency Min: 0.5 GHz
Frequency Max: 2 GHz
TSS: -42 dBm (8.5 dBV SNR)
Size: 2.68" x 2.30" x 0.50"
Log Slope: 75 ± 10 mV Max per dB
Log Range: -40 to +20 dBm
Settling Time: ±0.5 dB within 25 ns from 90%
Frequency Flatness: ±1.5 dB Max at -20 dBm
Video Bandwidth: 20 MHz over 60 dB logging range
Input Power Handling: CW RF Input Levels of +23 dBm Min
Overshoot: 1 dB during first 50 ns
Throughput Delay Time: 30 ns Max 10% RF to 10% Video
Warm Up Time: 10 seconds
Input VSWR: <2.5:1 Max UP to -20 dBm input
<3.0:1 Max up to +15 dBm input
Pulse Droop: 1 dB on pulses up to 250 µs
Monotonic Dynamic Range: ±75 mV, -40 dBm to + 20 dBm
Log Slope Linearity: -40 to +20 dBm ±1.00 dB Max at 25 °C,
±1.5 dB Max over temperature
Rise Time and Recovery Time: Rise Time: 25 ns Max
Recovery Time: 500 ns
Trailing Edge Monotonicity: ± 2 dB over full logging range
Pulse Width: within 10 ns of RF PW @ -5 dB from peak
Video Output Level Average @ -40 dBm Over Frequency: 300 ± 50 mV @ 25°C
Log Video Output Voltage Range: 300 mV to 4800 mV Nom, 0 to 5090 mV Max
Baseline DC Offset: 0 to 125 mV Max
Baseline Noise: 62 mV to 102 mV RMS
Load Stability: No oscillations 93 Ohm load and cable
Input Impedance: 50 ohms Nom
Voltages and Current (No Signal): +12.0 V +5% Max Unregulated 0.25 A Max
-12.0 V +5% Max Unregulated 0.25 A Max
Noise: 200 mV P-P Switching Power
Supply Noise. 20 to 100 KHz
Supply Voltage Fold Back: No damage
Functional Shock: 40 G (6 Shocks PER Axis, 6 to 9 m s Duration
Ripple: Power supply ripple of ±1 % from DC to 1 MHz on all power lines
Environmental Ratings:
Operating Temperature: -25 °C to +85 °C
Non-Operating Temperature: -40 °C to +85 °C
Humidity: To 100% +30 °C to +55 °C with Condensation, 240 HR Exposure
Vibration: 0.2" (Double Amplitude) 5-14 Hz, 2.0 G 14 to 33 Hz, 0.036" (Double Amplitude) 33 to 52 Hz, 5.0 G 52 to 500 Hz
Altitude: Non-Operating: Sea Level to 40,000 FT ASL.
Operating: Sea Level to 20,000 FT ASL
Fungus: No Fungus Nutrient Materials, PCB'S to be Humisealed