ERDLVA-2G8G-65-70MV

PMI Model No. ERDLVA-2G8G-65-70MV is a 2.0 to 8.0 GHz, CW immune ERDLVA. This model features an internal switch used to switch between the Bit In and RF In with input blanking on both ports. The video output is designed to drive a 150 ft cable.

Product Specifications

General Parameters:
Status: Active
Frequency Range: 2.0 to 8.0 GHz
Frequency Min: 2 GHz
Frequency Max: 8 GHz
TSS: -71 dBm
Size: 2.82” x 2.25” x 0.5”
Log Slope: 70 mV/dB ±3 mV/dB
Log Range: -65 to 0 dBm
Log Linearity: ±1.0 dB Max
Rise Time: 28 ns Max (10-90% @ -40 & -10 dBm)
Fall Time: 300 ns Max (@-40 & -10 dBm)
Recovery Time: 500 ns Max (From 90% to within 1 dB of baseline)
Settling Time: 50 ns Max (From 10% to within 35 mV, of final value @ -40 & -10 dBm)
Power Supply: 200 mV Max @ -40 dBm CW, -15 V ±5% @ 0.2 A Max
Finish: Gray Paint
VSWR: 2.3:1 Max
RF Connectors: RF & Video: SMA (F) DC Power & Control: 9 Pin D-Sub (F)
Video Load Impedance: 95±1 Ohms
Maximum Input Power(CW): 1 Watt CW, 100 Watt Peak @ PW = 1 µs & 1% Duty
Propagation Delay: 80 ns Max from 50% RF to 10% Video
DC Offset: 0 to 100 mV
Dynamic Range: -65 to 0 dBm
Leakage Level: 5000 H @ 50ºC
Isolation: 60 dB Min, All Ports
Switching Speed: 100 ns Max
Ripple: 100 mV Max
Video Frequency Flatness: ±1.25 dB Max @ 25ºC
Log Accuracy: ±1.25 dB Max
Baseline Shift with CW: 200 mV max. @ -40 dBm CW
Absolute Log Accuracy: ±2.0 dB Max
Pulse Width Process Range: 100 ns to 100 µs
Video Output @ -68 dBm: 330±88 mV for all frequencies
Video Output Drive Capability: Driving 100 ft RG180 into 95 Ohms load
Pulse Density Capability: 20% Duty @ 100 ns PW, 70% Duty @ 100 µs PW
Noise Level: 30 mV RMS Max
CW Immune Time: 4 ms Max
TSS (Measured): -71 dBm
Environmental Ratings:
Operating Temperature: -10 ºC to 85 ºC
Thermal Shock: -10 ºC to +85 ºC, 10 Cycles 1 hour dwell time at each temp, rate of temp change 15ºC/MIN