Low Noise Amplifier

PMI Model No. PE2-25-218-20-12-SFF is a 6.0 to 8.0 GHz Low Noise Amplifier that provides a minimum 25 dB of gain while maintaining a maximum gain flatness of ±1.5 dB maximum over the operating frequency. The noise figure is 4.5 dB typical and offers an OP1dB of 23 dBm minimum. This amplifier is supplied in our standard PE2 housing that can be used as an SMA connectorized or a surface mount component.

Product Specifications

General Parameters:
Status: Active
Frequency Range: 2.0 to 18.0 GHz
Frequency Min: 2 GHz
Frequency Max: 18 GHz
Gain: 25 dB Min
Gain (Measured): 25 dB Min - Measured 27.5 dB
Gain Flatness: ±1.5 dB Max
Gain Flatness (Measured): ±1.5 dB Max - Measured ±0.26 dB
Noise Figure: 4.5 dB Typ, 5.5 dB Max - Measured 3.2 dB
VSWR In/Out: 2.0:1 Max - Measured 1.15:1/1/12:1
DC Voltage Supply: +12 to +15 VDC
DC Current Draw: 350 mA Max - Measured 285 mA
OP1dB: 23 dBm Min - Measured >+23 dBm
RF Connectors: SMA (F) removable
Housing: PE2 Housing: 1.08" x 0.71" x 0.26"
Environmental Ratings:
Temperature: -55 ºC to +85 ºC Operating
Non-Operating: -65 ºC to +125 ºC Non-Operating
Humidity: MIL-STD-202F, Method 103B Cond. B
Shock: MIL-STD-202F, Method 213B Cond. B
Altitude: MIL-STD-202F, Method 105C Cond. B
Temperature Cycle: MIL-STD-202F, Method 107D Cond. A