PIM-SF-450M2D7G-25P-SFF Preliminary
PMI Model PIM-SF-450M2D7G-25P-SFF is a 450 MHz to 2.7 GHz Switch Filter D Matrix Assembly. This model has 7 inputs and 2 outputs along with 14 control lines to select the RF path. The unit is internally DC blocked and powered by ±5 V and +3.3 V.
Product Specifications
| General Parameters: | |
|---|---|
| Status: | Preliminary |
| Product Description: | PMI Model PIM-SF-450M2D7G-25P-SFF is a 450 MHz to 2.7 GHz Switch Filter D Matrix Assembly. This model has 7 inputs and 2 outputs along with 14 control lines to select the RF path. The unit is internally DC blocked and powered by ±5 V and +3.3 V. |
| Item No.: | 3 |
| Non-Filtered Path Insertion Loss Variation: | 0.6 dB Peak to Peak Max J3 to J8, J5 to J9 |
| Non-Filtered Path Loss Tracking: | 0.5 dB Max Over Frequency between J3 to J8, J5 to J9 |
| Non-Filtered Path Odd Order Inermod: | -18 dBc Min for J3, J5 with two 15 dBm RF Input Signals -40 dBc Min for J1, J2, J4, J6, J7 with two 15 dBm RF Input Signals |
| Non-Filtered Path VSWR (When Path is Selected): | 1.6:1 Max for J3, J4, J5 Ports 1.6:1 Max for J8, J9 Ports 1.2:1 Max for J1, J2, J6, J7 |
| Non-Filtered Path Limiting Characteristics: | With J3 or J5 Input Selected |
| Non-Filtered Path Maximum Leakage: | 28.5 dBm Max CW, 31.1 dBm (1.3 W) Max Spike for 25 ns with Max Pulse Input |
| Non-Filtered Path Maximum CW Input: | 10 W |
| Non-Filtered Path Maximum Pulse Input: | 50 W Peak, 10 µs Pulse Width at 0.2% Duty Cycle, 3 to 5 minutes. Non-Recurrent Pulse 750 W Peak, 0.5 Pulse Width |
| Non Filtered Path Frequency: | 0.45 to 2.65 GHz |
| Non-Filtered Path Spike Leakage: | 0.325 erg Max |
| Non-Filtered Path Recovery Time: | 200 ns Max. to 3 dB Point, 500 ns Max to the 1 dB Point |
| Filtered Paths Passband: | Filter 1: 0.85 to 2.7 GHz Min Filter 2: 1.48 to 2.7 GHz Min |
| Filtered Paths Insertion Loss @ 25°C: | Filter 1: 5.4 dB @ 0.85 to 0.88 GHz, 5 dB @ 0.88 to 2.7 GHz Filter 2: 5 dB @ 1.48 to 2.7 GHz |
| Filtered Paths Insertion Loss Variation @ 25°C: | Filter 1: 0.5 dB Peak to Peak Max @ 1.1 to 2.7 GHz Filter 2: 0.5 dB Peak to Peak Max @ 1.8 to 2.7 GHz |
| Filtered Paths Insertion Loss Variation Over Temperature: | Filter 1: 0.5 dB Peak to Peak Max @ 1.1 to 2.7 GHz Filter 2: 0.5 dB Peak to Peak Max @ 1.8 to 2.7 GHz |
| Filtered Paths Channel to Channel Insertion Loss Variation (J3-J8 and J5-J9): | Filter 1: 0.5 dB Peak to Peak Max @ 1.1 to 2.7 GHz Filter 2: 0.5 dB Peak to Peak Max @ 1.8 to 2.7 GHz |
| Filtered Paths Stop Band Response: | Filter 1: 50 dBc Min @ 0.05 to 0.7 GHz, 50 dBc @ 0.7 GHz (Referenced to worst case insertion loss from 0.88 to 2.7 GHz) Filter 2: 60 dBc Min @ 0.05 to 1.3 GHz (Referenced to worst case insertion loss from 1.48 to 2.7 GHz) |
| Filtered Paths Rejection: | Filter 1: 40 dBc Min @ 0.73 GHz, 50 dBc @ 0.7 GHz (Referenced to worst case insertion loss from 0.88 to 2.7 GHz) Filter 2: 60 dBc Min @ 1.3 GHz (Referenced to worst case insertion loss from 1.48 to 2.7 GHz) |
| Filtered Paths VSWR: | Filter 1: 1.7:1 Max Input and Output from 0.85 to 2.7 GHz Filter 2: 1.7:1 Max Input and Output from 1.48 to 2.7 GHz |
| Filtered Paths Insertion Loss Differential from Non-Filtered to Filtered Path: | Filter 1: 2 dB Max @ 0.95 to 2.6 GHz Filter 2: 2 dB Max @ 1.58 to 2.6 GHz |
| Filtered Paths Cross Channel Isolation: | J3 to J9: 60 dB Min with J3-J8 and J5-J9 in Through Path J5 to J8: 60 dB min. with J3-J8 and J5-J9 in Through Path |
| Filtered Paths Isolation: | J3 to J8: 60 dB Min with SW2, SW3 Open SW4, SW5, SW6, SW7 Through J5 to J9: 60 dB Min with SW2, SW3 Open SW4, SW5, SW6, SW7 Through |
| Filtered Paths Control Inputs: | 14 Discrete Control Inputs (E1 to E14) Logic "0" -0.3 to 0.8 V: Switch Position Open Logic "1" 2 to 3.9 V: Switch Position Closed |
| Filtered Paths Absolute Max Control Line V/I: | -0.5 to 4.25 VDC @ ± 20 mA |
| Filtered Paths Control Line Input Terminations: | E3 and E6 Internally Matched to 50 Ohm 2 ft. Trace |
| Filtered Paths Control Line Undriven Inputs: | All Control Lines have Internal 100 k Pull-Down Resistor |
| Filtered Paths Power Handling (Absolute Max): | 30 dBm CW Max @ J1, J2, J6, J7 20 dBm CW Max @ J4 |
| Filtered Paths Switching Speed: | 500 ns Max to within 1 dB of Steady State Output, 150 ns Rise Time |
| Filtered Paths DC Power: | +5 VDC (±3%) @ 400 mA Max -5 VDC (±3%) @ 350 mA Max +3.3 VDC (±10%) @ 10 mA Max |
| Filtered Paths Switching Spectrum: | -40 dBc Max >10 MHz away from 500 MHz to 2.6 GHz carrier with a +16 dBm input CW signal on J3 or J5 input and switching E3 or E6 7.2 us on/3.2 us off. Filter select switches to be set to the through paths. |
| Filtered Paths RF Decoupling: | All DC Power and Control Lines Decoupled from RF by 40 dB min. |
| Filtered Paths Switching Transients: | 650 mV Peak Max <150 MHz, -60 dBm >150 MHz |
| Filtered Paths Warm-Up Time: | 5 minutes Max after turn-on at -35 °C |
| Power / Control Connector: | 25 Pin Micro-D Connector |
| Connectors: | SMA Female |
| Size (Excluding Connectors): | 3.5" x 5.5" x 0.7" |
| Finish: | Painted Blue (Mounting Surface Chem-Coat MIL-DTL-5541 Type I or II, Class 3) |
| Weight: | 17 oz Max |
| Export Classification (ECCN): | EAR99 |
| Environmental Ratings: | |
| Temperature: | -35 °C to +77 °C (Operating) -54 °C o +94 °C (Storage) |
| Altitude: | MIL-STD 810, Method 500.4, Procedure I, Sea Level to 45, 000 ft. |
| Vibration: | 100 to 250 Hz, -3 dB/Octave (Random) |
| Acoustic Noise: | 145 dB max. (Referenced to 0.0002 Dyne per Square Centimiter) |
