PTRAN-100M18G-SFB-3UVPX-MCU-MAH Preliminary
3U Open VPX - Transceiver
PMI Model PTRAN-100M18G-SFB-3UVPX-MCU-MAH is a Transceiver covering the frequency range of 0.1 to 18 GHz. The Transceiver fits into a 3U Open VPX form factor utilizing two four position high speed VITA 67 RF connectors. This unit up-converts a 0.1 to 4 GHz transmit signal to the 2 to 18 GHz range. This unit also down-converts a 0.1 to 18 GHz received signal to the 0.1 to 4 GHz intermediate frequency range for analog to digital conversion. A receive filter bank incorporates a 2-Way absorptive switch to select an input, along with two six way switches allowing one of six filter paths to be chosen. The unit includes a micro-controller allowing for ethernet control over the P1 connection and providing a total solution in a single backplane slot.
Product Specifications
| General Parameters: | |
|---|---|
| Status: | Preliminary |
| Product Description: | PMI Model PTRAN-100M18G-SFB-3UVPX-MCU-MAH is a Transceiver covering the frequency range of 0.1 to 18 GHz. The Transceiver fits into a 3U Open VPX form factor utilizing two four position high speed VITA 67 RF connectors. This unit up-converts a 0.1 to 4 GHz transmit signal to the 2 to 18 GHz range. This unit also down-converts a 0.1 to 18 GHz received signal to the 0.1 to 4 GHz intermediate frequency range for analog to digital conversion. A receive filter bank incorporates a 2-Way absorptive switch to select an input, along with two six way switches allowing one of six filter paths to be chosen. The unit includes a micro-controller allowing for ethernet control over the P1 connection and providing a total solution in a single backplane slot. |
| Item No.: | 65 |
| Control Logic: | TTL ('0' 0 to 0.8 V), ('1' 2 to 5 V) |
| J1 Input (RF Receive Input): | Frequency: 0.1 to 18 GHz Power Level: -80 to -10 dBm Typ Connector: SMPM Male |
| J4A Input (IF1 Input): | Frequency: 0.1 to 4 GHz Power Level: 0 dBm Typ Connector: VITA 67 |
| J4B Input (IF2 Input): | Frequency: 0.1 to 4 GHz Power Level: 0 dBm Typ Connector: VITA 67 |
| J9 Input (LO1 Input): | Frequency: 4 to 20 GHz Power Level: 10 dBm Typ Connector: VITA 67 |
| J10 Input (LO2 Input): | Frequency: 4 to 20 GHz Power Level: 10 dBm Typ Connector: VITA 67 |
| Inputs: | J1, J4A, J4B, J9, J10 |
| Outputs: | J3A, J3B, J6, J8, J11, J12 |
| J3A Output (IF1 Output): | Frequency: 0.1 to 4 GHz Power Level: 0 dBm Typ for limited SDLVA Channel Connector: VITA 67 |
| J3B Output (IF2 Output): | Frequency: 0.1 to 4 GHz Power Level: 0 dBm Typ for limited SDLVA Channel Connector: VITA 67 |
| J6 Output (RF Transmit Output): | Frequency: 0.1 to 18 GHz Power Level: 0 to 10 dBm Typ Connector: SMPM Male |
| J8 Output (RF Transmit Sample): | Frequency: 0.1 to 18 GHz Power Level: -40 to -30 dBm typ. Connector: SMPM (M) |
| J11 Output (Log Proportional Detected Video Output - V1): | Connector: SMA Female (Cabled to UMC Female) |
| J12 Output (Threshold Detected Video Output - V0): | Connector: Mezzanine Connector |
| TTL 1: | Transmit Path Output Select, Receive Filter Bank Input Select 0 - Output to TX Filter Bank, RX-Backplane/ Input (J1) 1 - Output to RX Filter Bank, RX-Transceiver Input |
| TTL 2: | Receive Filter Select 000 - Thru Channel 001 - Channel 1 010 - Channel 2 011 - Channel 3 100 - Channel 4 101 - Channel 5 110 - Not Defined 111 - Not Defined |
| TTL 3: | Linear or Limited SDLVA RF Output Channel 0 - Limited RF Output Channel 1 - Linear RF Output Channel |
| TTL 4: | Receive Thru Channel or Down-Converted Channel 0 - Thru Channel 1 - Down-Converted Channel |
| TTL 5: | IF1 or IF2 Output Select 0 - IF1 Output Channel 1 - IF2 Output Channel |
| TTL 6: | IF1 or IF2 Input Select 0 - IF1 Input Channel 1 - IF2 Input Channel |
| TTL 7: | Transmit Thru Channel or Up-Converted Channel 0 - Thru Channel 1 - Up-Converted Channel |
| TTL 8: | Transmit Filter Select 000 - Thru Channel 001 - Channel 1 010 - Channel 2 011 - Channel 3 100 - Channel 4 101 - Channel 5 110 - Not Defined 111 - Not Defined |
| TTL 9: | 5 Bit Attenuation Control (1 dB Steps) 00000 - 0 dB Attenuation 11111 - 31 dB Attenuation |
| TTL 10: | LO Select 00 - M1-LO1, M2-LO1 01 - M1-LO1, M2-LO2 10 - M1-LO2, M2-LO1 11 - M1-LO2, M2-LO2 |
| TTL 11: | SDLVA Threshold Adjust 000000 - Lowest Threshold Level 111111 - Highest Threshold Level |
| TTL 12: | SDLVA CTL A (Enable) 0 - Internal Comparator Triggered SPST 1 - External Trigger Enable (SW CTL B) |
| TTL 13: | SDLVA CTL B (Trigger) 0 - Limited RF CH SPST ON (Insertion Loss) 1 - Limited RF CH SPST Switch Off (Isolation) |
| Receive and Transmit Switched Filter Banks: | VSWR Over 90% Passband: 2.0:1 Max Switching Speed: 100 ns Typ Thru Channel Passband: 0.1 to 18 GHz Channel 1 Center Frequency: 3.4 GHz 3 dB Bandwidth: 2 GHz Rejection: -40 dBc Typ, -30 dBc Min (0.1 to 2 GHz), -40 dBc Typ, -30 dBc Min (6.8 to 18 GHz) Channel 2 Center Frequency: 5.4 GHz 3 dB Bandwidth: 2 GHz Rejection: -40 dBc Typ, -30 dBc Min (0.1 to 4 GHz), -40 dBc Typ, -30 dBc Min (6.8 to 18 GHz), Channel 3 Center Frequency: 7.4 GHz 3 dB Bandwidth: 2 GHz Rejection: -40 dBc Typ, -30 dBc Min (0.1 to 6 GHz), -40 dBc Typ, -30 dBc Min (8.8 to 18 GHz) Channel 4 Center Frequency: 9.4 GHz 3 dB Bandwidth: 2 GHz Rejection: -40 dBc Typ, -30 dBc Min (0.1 to 8 GHz), -40 dBc Typ, -30 dBc Min (10.8 to 18 GHz) Channel 5 Center Frequency: 11.4 GHz 3 dB Bandwidth: 2 GHz Rejection: -40 dBc Typ, -30 dBc Min (0.1 to 10 GHz), - 40 dBc Typ, -30 dBc Min (12.8 to 18 GHz) |
| SDLVA: | V0 (Video Comparator Signal Amplitude): LVTTL Video Comparator Delay: 50 ns Typ Video Comparator Threshold Level: Adjustable with analog voltage, -60 dBm ± 3 dB Max V1 (Log Video Signal Amplitude): 1 V Max Log Slope: 10 mV/dB into a 50 Ohm Load (±1 mV) Max Log Range: -65 to 5 dBm Min Log Linearity: ±1.75 dB (-40 to +85 °C) Max Pulse Range: 100 ns to 250 µs Rise Time: 35 ns Max Settling Time to ±1 dB: 50 ns Typ Recovery Time: 350 ns Max CW Immunity Range: TSS to -45 dBm (1 dB Degradation) Pulse Considered "CW": 1 ms typ. Rejection Time: 1 ms Typ Droop: 1 dB Max SPST Isolation: 70 dB Typ SPST Switch Speed: 20 ns Typ SW CTL A (Enable): TTL 0: Internal Comparator Triggered SPST TTL 1: External Trigger Enable (SW CTL B) SW CTL B (Trigger): TTL 0: Limited RF CH SPST Switch On (Insertion Loss) TTL 1: Limited RF CH SPST Switch Off (Isolation) |
| Digital Control: | Ethernet through P1 Connector |
| Power Supply: | +12 V @ 2 A +5 V @ 1.5 A +3.3 V @ 0.5 A -12 V @ 1 A (Provided by an open VPX backplane through P0 connector rated for the above voltages) |
| Size: | 6.299" x 3.937" x 1.915" (3U Open VPX Card) |
| Finish: | Gold Plated |
| Export Classification (ECCN): | EAR99 |
