General Parameters: |
Status: | Preliminary |
Frequency Min: | 14.65 GHz |
Frequency Max: | 15.35 GHz |
Insertion Loss: | 2.5 dB Maximum (-10 dBm TTL 0) |
Attenuation Range: | 20 dB (-10 dBm TTL 1) Typical |
Digital Control: | 1 Bit TTL Digital Control |
VSWR: | 1.5:1 (-10 dBm TTL 0) |
Attenuation Flatness: | ±1 dB @ 25°C TTL 1 Over Frequency Range |
Attenuation Accuracy: | ±1 dB @ 25°C TTL 1 Over Frequency Range |
Swiching Time: | 90 ns |
TTL Control: | TTL "0" = 0 dB, TTL "1" = 20 dB |
Connectors: | Gold Plated Removable SMA Female |
DC Connector: | Solder Pins |
Peak Power: | 250W (TTL 0, PW=40 us, DU) |
Average Power: | 25W (TTL 0, PW=40 us, DU) |
Duty Cycle: | 10% |
Pulse Width: | 40 us |
Flat Leakage: | 50 mW (0 to 250 W) |
Limiting Threshold: | +7 dBm Minimum (TTL 0) |
Recovery Time at 3 dB: | 100 us |
Bias Supply: | 150 mA @ +5VDC and -15VDC |
Surface Finish: | Gold Plated to MIL-G-45204 |
Mounting Provisions: | Through Holes for M2 Screws |
Screening: | MIL-STD-883 CLASS C METHOD 5008 |
Environmental Ratings: |
Operating Temperature: | -55 ºC to +95 ºC Operating |
Non-Operating Temperature: | -65 ºC to +125 ºC Non-Operating |
Humidity: | MIL-STD-202F, Method 103B Cond. B (96 Hours at 95% RH) |
Shock: | MIL-STD-202F, Method 213B Cond. B (100g/6msec) |
Vibration: | MIL-STD-202F, Method 204D Cond. B (30 g Peak) |
Altitude: | MIL-STD-202F, Method 105C Cond. B (70,000 ft.) |
Thermal Shock: | MIL-STD-202F, Method 107D Cond. A (5 Cycles, -55°C to +125°C) |
Salt Spray: | MIL-STD-202F, Method 101D Cond. B |
Seal: | MIL-STD-202F, Method 112C Cond. C (5 X 10-7 atm cc/sec) |