P2T-2G6G-65-T-SFF Active
SP2T Absorptive Switch
Buy Now
Additional Documents
- Product Feature
- Test Report - 11/1/18
- PL23767 - Unit Data
- PL23766 - Unit Data
- PL26963 - Unit Data
- PL26964 - Unit Data
- PL26965 - Unit Data
- PL26966 - Unit Data
- PL26967 - Unit Data
- PL26968 - Unit Data
- PL26969 - Unit Data
- PL26970 - Unit Data
- PL26971 - Unit Data
- PL26972 - Unit Data
- PL26973 - Unit Data
- PL26974 - Unit Data
- PL26975 - Unit Data
- PL26976 - Unit Data
- PL30053 - Unit Data
- PL30054 - Unit Data
- PL30055 - Unit Data
- PL30056 - Unit Data
- PL30057 - Unit Data
- PL30058 - Unit Data
- PL30059 - Unit Data
- PL30060 - Unit Data
- PL30061 - Unit Data
- PL30062 - Unit Data
- PL30063 - Unit Data
- PL30064 - Unit Data
Quantic PMI Model P2T-2G6G-65-T-SFF is an Absorptive, High Speed, Single Pole Two Throw Switch capable of switching within 100ns maximum. This unit operates over the 2.0 to 6.0 GHz frequency range with 65 dB typical isolation.
Product Specifications
| General Parameters: | |
|---|---|
| Status: | Active |
| Configuration: | SP2T |
| Reflective / Absorptive: | Absorptive |
| Frequency Range (GHz): | 2 to 6 |
| Frequency Min (GHz): | 2 |
| Frequency Max (GHz): | 6 |
| Insertion Loss (dB): | 1.5 dB Max |
| Insertion Loss - Typ (dB): | 1.5 dB |
| Isolation (dB): | 65 dB Typ |
| Isolation - Typ (dB): | 65 dB |
| Input Power (dBm): | 20 dBm Max |
| Survival Power: | +30 dBm Max |
| Impedance: | 50 Ohm |
| Switching Speed: | 100 ns Max |
| Switching Speed (Typ): | 100 ns |
| Control Signal: | Solder Pin TTL Compatible |
| VSWR In/Out: | 2.0:1 Max |
| Connectors: | SMA Female |
| Size: | 1.0" x 1.0" x 0.4" |
| Finish: | Painted Blue |
| Export Classification (ECCN): | EAR99 |
| Environmental Ratings: | |
| Temperature (Operating): | -55 ºC to +85 ºC |
| Temperature (Storage): | -65 ºC to +125 ºC |
| Humidity: | MIL-STD-202, Method 103B Cond B |
| Shock: | MIL-STD-202, Method 213B Cond B |
| Vibration: | MIL-STD-202, Method 204D Cond B |
| Altitude: | MIL-STD-202, Method 105C Cond B |
| Temperature Cycle: | MIL-STD-202, Method 107D Cond A |
