SP3T Terminated Switch

PMI Model No. P3T-2G18G-60-T-SFF-REVB-SP is a single pole, three throw, terminated switch designed to operate over the 2.0 to 18.0 GHz frequency range. This model utilizes three independent TTL controls and designed to maintain low insertion loss.  Unit size is 1.50" x 1.00" x 0.40" and contains SMA (F) connectors.

Product Specifications

General Parameters:
Status: Active
Frequency: 2.0 to 18.0 GHz
Frequency Min: 2 GHz
Frequency Max: 18 GHz
Insertion Loss (Typ): 3.2 dB
Isolation (Typ): 60 dB
Reflective / Absorptive: Absorptive
Switching Speed (Typ): 50 ns
Configuration: SP3T
Isolation: 60 dB Min
Insertion Loss: 3.2 dB Max - Measured 3.07 dB
VSWR In/Out: 2.0:1 Max - Measured 1.93:1
Input Power: 200 mW CW Max - Measured 200 mW CW
Video leakage: 20 mV @ 350 MHz BW Max - Measured <10 mV
Switching Speed: 50 ns Max On/Off - Measured 48.5 ns 15 ns Max Rise/Fall
Control Signal: Three Line TTL (Surge protection included on TTL lines)
Power Supply: +5 VDC @ 110 mA Typ,
-12 VDC @ 90 mA Typ
Connectors: SMA (F)
Power & Control Connector: Solder Pins
Size: 1.50" x 1.00" x 0.40"
Features: Low Insertion Loss, High Isolation, Fast Switching Speed, Low Video Leakage, Small Size, Independent TTL Control
Environmental Ratings:
Operating Temperature: -45 ºC to +90 ºC
Non-Operating Temperature: -54 ºC to +125 ºC
Humidity: MIL-STD-202F, Method 103B Cond. B
Shock: MIL-STD-202F, Method 213B Cond. B
Vibration: MIL-STD-202F, Method 204D Cond. B
Altitude: MIL-STD-202F, Method 105C Cond. B
Temperature Cycle: MIL-STD-202F, Method 107D Cond. A